百達翡麗手錶不能上弦的原因-天津百達翡麗售後服務中心

【天津百達翡麗售後服務中心：天津市和平區赤峰道136號天津國際金融中心大廈30層】百達翡麗手錶不能上弦，嚴重的影響了我們的正常使用。通過原因分析，我們可以發現其多是百達翡麗手錶內部的原因?下面，就讓我們為大家介紹一番。

1、百達翡麗手錶的立輪和離合輪斜齒打滑。

1, set and clutch wheel sliding bevel.

2、百達翡麗手錶的柄軸方與離合輪方孔配合不好。如果方孔大，軸方小，柄軸方帶不動離合輪而打滑，當然也帶不動立輪。

2, arbor with clutch wheel square hole is bad. If square hole is big, small shaft side, arbor with fixed clutch wheel and skid, of course cant belt wheel.

3、百達翡麗手錶的大、小鋼輪嚙合傳動不穩。由於主夾板和條夾板條軸孔磨損大，使大鋼輪軸偏斜，即大鋼輪轉動時軸向擺動大，與小鋼輪有時嚙合有時脫嚙。

3, large and small steel gear transmission. Due to the plate and bottom plate and the wear is very big, make big steel shaft deflection, the big steel wheel turns axial runout, and small steel wheel meshing sometimes snapping off sometimes.

4、百達翡麗手錶的大鋼輪和小鋼輪軸向脫嚙。由於大鋼輪螺釘鬆動，大鋼輪螺釘斷裂，或大鋼輪軸向移動，大、小鋼輪不在同一平面上造成脫嚙。

4, large steel wheel and small steel shaft to snapping off. Because of the large steel wheel screw loosening, large steel wheel screw fracture, or big steel axle to move, large and small steel wheel not caused on the same plane to take off the meshes.

5、百達翡麗手錶的主傳動系各輪片與相應齒軸間的鉚合或壓合鬆動。

5, round piece on main drive system and corresponding riveting or bonding between the gear axis is loose.

總之，想要我們的愛表能夠更加長久的陪伴著我們一路走下去，我們就需要在平時的生活當中，更多的去了解更多有關於手錶保養方面的知識。這樣才能更好的保護好我們的愛表。

推薦閱讀：