genymotion安卓模擬器怎麼用telnet控制？

01-05

在DDMS上顯示的是192.168.56.101:5555，但在cmd上用telnet localhost 5555顯示連接不上埠。

謝邀。

建議題主在提問之前先自行 Google 一下該問題。

剛剛在機器上試了一下，確實是醬紫的。

突然發現知乎貌似不支持 MarkDown 語法。用 MarkDown 寫了一整天需求文檔，一時半會兒轉不過彎來。

該問題在偉大的 Google 或者 Stack Overflow 已經有了明確的答覆（Copy 自 android - Unable to run telnet commands on Genymotion emulator on Mac）：

問題表述：

I am running Genymotion 2.3.1 on Mac OS X Yosemite. When I was running Genymotion on Win 7, I could telnet to the emulator and run commands like "geo fix" to set a location. However, on Yosemite, when I telnet to the emulator and run a command, I do not get an OK response, and nothing happens. This is an example:

$ adb devices List of devices attached 192.168.56.101:5555 device

$ telnet 192.168.56.101 5555 Trying 192.168.56.101... Connected to 192.168.56.101. Escape character is "^]". geo fix 34 -118 sms send 1234 test Connection closed by foreign host. $

After running the geo fix command, I checked on the emulator, and the GPS location was not changed. The sms send command caused the telnet session to close. Any ideas?

問題回答：

Telnet is not supported on Genymotion.

To access the Genymotion Shell you need to open the Genyshell app or run it in command line. It will open a terminal where you will be able to do all the commands you used to do.

The commands are different than telnet, so type help to discover all the features you can access after opening this shell.

肥肥英語不好，就不要難為肥肥費那麼大勁給你翻譯了，好不啦？

么么噠。